人妻一级片,刺激对白我91,强制高潮88av,亚洲有码中文字幕动漫

?
杭州油罐清洗廠家電話

【新聞中心

  • 儲油罐機械清洗原理
  • 本站編輯:杭州啟翔環??萍加邢薰?/span>發布日期:2018-02-22 14:04 瀏覽次數:

儲油罐機械清洗技術是將被清洗儲罐底部具有流動性的油品移送至接收油罐,將清洗油供給罐中的油品經加溫加壓后通過清洗機攪拌、溶解罐內剩余凝固油,經過濾器清除雜質后移送至接收油罐,比較后用溫水對儲罐內各部位進行循環清洗,以達到罐內動火條件。在清洗過程中持續注人惰性氣體至被清洗儲罐,從而使其內部氧氣濃度始終保持在8VoL%以下,防止爆炸等危險的發生;配備氧氣及可燃?xì)怏w檢測裝置,時刻監測被清洗儲罐內的氧氣及可燃?xì)怏w濃度,確保機械清洗作業安全運行。

Mechanical cleaning technology of oil tank will be cleaning the bottom of the tank is transferred to the mobility of the oil receiving tank, cleaning oil supply tank in oil by heating and pressurizing by cleaning machine stirring and dissolving tank residual oil after solidification, filter to remove impurities after transferred to the receiving tank, at the end of each part of the storage tank for cleaning cycle with warm water, in order to achieve the conditions of hot pot. Continuous injection of inert gas to the tank to be cleaned in the cleaning process, so that the internal oxygen concentration remained below 8VoL%, to prevent the occurrence of explosion danger; equipped with oxygen and combustible gas detection device, time monitoring of cleaning oxygen and combustible gas in the tank concentration, to ensure safe operation of mechanical cleaning.


清洗流程1設備安裝

Cleaning process 1 equipment installation


采用輕型管線及閥門快速完成設備的安裝及管線的連接,并測試系統整體嚴密性;

Use light pipeline and valve to quickly complete the installation of the equipment and connection of the pipeline, and test the overall tightness of the system.


2油移送

2 oil transfer

ser_08.jpg

通過移送模塊將被清洗油罐中具有流動性的油品移送至接收油罐;

The flow of oil in the oil tank is transferred to the receiving oil tank through the transfer module.


3同種油清洗

3 the same kind of oil cleaning


清洗模塊將清洗油供給罐中的油品經加溫、加壓后,通過設置在被清洗儲罐單盤或罐側壁檢修孔上的清洗機對被清洗儲罐內部凝固油進行擊碎、溶解,使其具有較好的流動性,并通過移送模塊過濾后移送至接收油罐;

The cleaning module will clean the oil supply tank in oil by heating and pressurizing, the cleaning machine is arranged in the tank wall of the tank or a single disk access hole on the break, the tank cleaning oil solidification dissolved, which has good fluidity, and through the transfer of the filtered transferred to the receiving module oil tank;


4溫水清洗

4 warm water cleaning


由清洗模塊對預先加人到油水分離模塊中的清水進行加溫、加壓后,通過清洗機清洗儲罐內各部位,利用油水分離模塊分離溫水清洗循環過程中的油水混合物,分離出來的油品由回收泵移送至接收油罐,分離出來的清水繼續進行溫水清洗循環作業。

To add to the advance of oil-water separation module in water for heating and pressurizing by cleaning module, through various parts of machine cleaning tank, the oil-water oil-water separation module separation warm water cleaning cycle in the mixture, the separated oil transferred from the pump to the receiving tank recovery, separated water to warm water cleaning cycle homework.


技術優勢對比

Comparison of technical advantages


人工清洗儲油罐作業人員從罐側壁檢修孔進人儲罐內搭梯進行人工擦洗,儲罐空間狹小,空氣不流通,可燃性氣體濃度高,易發生中毒和爆炸事故,施工作業環境惡劣,嚴重地?fù)p害作業人員的身心健康;另一方面,從罐內清除的污油及人工擦洗產生的大量污水造成罐區和周邊地區環境的污染,同時較長的清洗周期(平均為二個月)降低了庫區的儲存調節能力,直接影響庫區的正常生產,大量廢棄的罐底油還造成資源浪費和環境污染。對比傳統的儲罐清洗方式,機械清洗技術實現了儲罐全過程密閉清洗,具有清洗時間短、健康、安全、罐底油回收率高、社會效益及經濟效益顯著的特點。

The storage tank operating personnel manual cleaning from the tank wall cleaning ladder manhole Jinren tank, tank space, air circulation, combustible gas concentration is high, prone to poisoning and explosion accidents, the construction work environment is bad, serious harm to the health of workers; on the other hand, a large number of sewage removal from the tank of oil pollution caused by the environment and cleaning the tank and the surrounding area pollution, at the same time cleaning cycle (mean two months) reduced the reservoir storage adjustment ability, directly affect the normal production of the reservoir area, a large number of waste oil tank bottom also caused the waste of resources and environmental pollution. Compared with traditional tank cleaning methods, mechanical cleaning technology achieves closed storage tank cleaning process, which has the characteristics of short cleaning time, health, safety, high recovery rate of tank bottom oil, remarkable social and economic benefits.